thesis design options not working

popular homework editor website au

Year after year, we review dozens of reader nominations, revisit sites from past lists, consider staff favorites, and search the far-flung corners of the web for new celebration of new year essay for a varied compilation that will prove an asset to any writer, of any genre, at any experience level. This selection represents this year's creativity-centric websites for writers. These websites fuel out-of-the-box thinking and help writers awaken their choke palahnuik and literary analysis. Be sure to check out the archives for references to innovative techniques and processes from famous thinkers like Einstein and Darwin. The countless prompts, how-tos on guided imagery and creative habits, mixed-media masterpieces, and more at Creativity Portal have sparked imaginations for more than 18 years. Boost your literary credentials by submitting your best caption for the stand-alone cartoon to this weekly choke palahnuik and literary analysis from The New Yorker. The top three captions advance to a public vote, and the winners will be included in a future issue of the magazine.

Thesis design options not working an essay on the limits of painting and poetry

Thesis design options not working

Have olaudah equiano essay congratulate

This is where my html and CSS knowledge stops:. Do you have any suggestions on how to go forward to achieve this? Maybe this can be achieved with some CSS styling? You might have to play with the numbers to your liking.

Nice, I went to the beta a while back however, when I view the various themes in wordpress admin preview section it still says 1. Is that right or did my upgrade attempt fail? Yeah, it does now. Posted about it in the forum. Can you help Kristarella? Have a look at my site and here is the code below. What am I doing wrong? Thank you in advance! Kristarella, Thanks SO much! You are too kind. I have to tweak my headline a bit still to get it on one line.

Bless your heart girl. I do yes! I appreciate very much the hand holding Kristarella. Any help that you are willing to offer is deeply appreciated. I thank you in advance. The reason it spans the whole width is because it is a paragraph and paragraphs are block level elements whose natural behaviour is to span the whole width of the container they are in.

This is normal and quite correct, but can be fairly easily manipulated with CSS. Thank you. Tried it but the tagline just ended up all the way on the left under my pic. Maybe Thesis might be the way to go…. It worked! Thanks Kristarella. Mat, I find that Thesis is good for pretty much any project: simple or complex, static or dynamic. Some do find it takes some getting used to though, it does have a slightly different but in the end safer and more efficient way of doing things.

I asked a dumb question before and you were kind enough to answer me, so here goes again! Is this because the image is too large or because its not coded right? I put the image in the thesis- custom-image folder? I saved the image as a jpeg and a gif and neither one will show up. If anyone at all would be so kind as to help with this, the blog is panamom.

If you put a slash before it, it will think that the image is always in the home directory. Is there another location I should be putting the image in? Is there a size limit for the image or will Thesis resize it regardless? You need to confirm where your image is on the server and you need to use its exact name. JPG or. However, floated divs do wrap around other floated divs. Oh, haha. My site is upgraded to thesis 1. Thank you SO much!! One note for you that may help others with this though.

I banged my head for over an hour, reinstalling things, renaming folders etc. Nina — Welcome! The image can be as wide as you like, but the main content of it should probably not be wider than your content. Then the edges of the image need to blend out to a solid colour or a repeating background.

Something that can span the width of the browser, no matter how wide it is. Graham — I thought it was on by default, but that is a good thing to check for anyone having problems. Thanks for the heads-up. Followed your instructions, so far so good… Can you tell me how to change the headline colour please?

Got it sorted… I use —. Quick question! So the tabs are under the header logo. My issue is that between this logo and the tabs nav , there is a small space filled with white. So I went in my custom. But when I check back in Inspector, the. So, to override it you need to use one style declaration. Thanks for the help. The option is unchecked already in thesis options!

Not sure why I see that anyway. Browsers have style default and I find sometimes a link can get a bit of extra space beneath it, so if you give a height to the div that surrounds that link it can help. Actually your code worked! What I was saying was that before the fix, IE did not have this issue while chrome did! Here is a link to my css. Did you clear your cache wild guess? Suzi — it seems right on my computer too, it looks good.

I made a little note of anything I saw that was not quite right, but overall the full-width seems to be okay according to your stylesheet. Suzi, What plugin or script? Did you use jsquery? I used SlideShowPro. How can I make a second Full width navbar on top? Could you help me? Then you will need to copy the styles for ul tabs and add them to ul tabs2. I enjoyed your tutorial. One floats to the left, the other to the right.

The strange thing is, I copied the code from one site to the other, so they should be exactly the same. Blog Website. I followed your latest tutorial and succeeded in getting the full width header. It will flash up for a brief moment, and then disappear.

Below is the code I used. Where do I place the image code so that it displays? Good work! Sorry for the delay in my reply. No, worries. Looking forward to reading and learning from your other tutorials. The header will not display and just shows the alt text and a red x. I know I need a ie hack and have ut on in, but I am having trouble figuring out just what code to enter that will fix it. Any ideas? Ari — Sorry, but the header is showing up in my IE6,7 and 8 so the code must be fine. Eugene — Sure.

You can use conditional tags. I have a post about adding different headers to different pages , which shows an example of using conditional tags. Pooja — custom. Not adding in a whole new header div. Thank you so much for the tutorial. Using Thesis 1. Site is travelgawker. Thank you! Brendon — In 1.

Is there an adjustment that needs to be used for Thesis 1. Ceasor — You need. Thanks Kristella. Last question: Do I keep everything else the same in the tutorial to achieve the styling? Ceasor — Everything else regarding the header should be fine. The CSS for the navigation menu is quite different; you might be able to just swap ul tabs with ul.

I will be updating my Thesis related tutorials for 1. This is a great post. I have one question though and I am sure for a professional coder it is an easy one. What if you are using a header image for the header instead of just a colored background? How do I get the image to appear full width without the white space? I am rocking Thesis 1. You can see an example at Organic Renaissance.

I have it set to full-width framework and the page padding at 0. Vincent — Unless you have a seamless repeating image, a single image will not be full-width of the browser which is what the tutorial is about. Thank you for the prompt reply and information. Yes, you are correct, I am simply trying to get the header to be the full width of the content rather than the browser.

Where does that code go? Vincent — that code should go in custom. I just remembered that removing the padding from the. Also, I think you would be interested in my video on the full-width framework. OK, so riddle me this, Batwoman, I was able to update the headers across all 10 sites to be the full width of the content and they look so much better thank you very much!

If I read the code correctly, it looks like you have a Feature Box. Expect your display options to improve dramatically in a future release! I am currently rebuilding this site with Thesis presently, you cannot see the build externally due to a. The reason for trying to replicate is because, due to the type of business it is and the inherent lack of professional web sites, we get mad props based on the elegance of the design and inherent professional look.

I made an image demo to demonstrate what I mean:. Thank you again for the superb guidance. It reminds me of that scene in Finding Nemo:. Say the first thing again. And is there different code to serve up the header image? Of course, everything is easy when you understand it.

Are you aware of anything that diagrams which file does what, e. Anyway, I am not trying to wear you out. You provide an unbelievable and invaluable resource and your time and thoughts are appreciated. Do you know if I can make custom headers for each individual page in thesis? I would like to have a seperate header at the top of every page to make the pages unique. Is this possible? I have beem searching for days to figure it out. A hint for determining if provided code goes in custom.

Nothing in layout. Article on CSS specificity Also layout. Shannon — I have an article on page specific headers that should help you. What were you searching for days using? When I do this , The default header is not getting removed. When i check my code using firebug , I can see two headers. The default header is not getting removed. Ok, what am I doing wrong?

I inserted the code from your post 77 into the custom. I am not getting the repeating image and it appears that I am constrained by a container. Thesis Design Options indicates the maximum column size is which is what I set it at assuming that it would give me the full page and allow the repeating image.

Ok, the repeating image now displays. I reset the content column to and the sidebar to Everything visually is out of whack. Any idea what needs to be done to match the images so we have the seamless image without the black border padding? After trial and error work for the better part of the day, I finally got it lined up. Some of this stuff is finally starting to make a little more sense. Thank you for your help! Hi Kristarella, thank you so much for your posts. I have encountered difficulties with the full-page framework settings.

I appreciate it. Pilawgroup — You will need CSS like in comment 66 and Thanks I must have been dozing off looking for the answers through the comments. Mucho appreciado! Thanks for the tutorial. Really cool. The website is veritaschristianschool. Look for a css attribute in your custom. I would try menu first — just add:. Clay — You need. You could change those to background:transparent; if you want the image to show through.

The red is still covering up the graphic. I now have:. Then, it looks like the link needs the transparent background, not the list item. So, the CSS should look like:. Hi I have used your tutorial for a couple sites. So thank you. I have no issues with the header and content areas lining up in Firefox, only in IE. In IE, the header appears with the content area background showing up on the right side. If I resize the column widths, setting one 10 px smaller, I can get the background color to go away, but then my header appears too wide for the content.

The header image is sized to pixels wide. Hey there! How would I add a full width video to a post, with this feature? I saw it done the other day when Chris Pearson was interview by some guy. It looked fantastic! So you could have some default content like a picture in there and then you would specify your videos for each post. You could do it with custom fields too. Not quite as simple, but maybe more future proof coz the video info is stored in the database with the post.

Thanks for all the help! This will show the video only on the single post page hopefully. Do I need to add a new one of these for each post? Must I have an image there? Should it just be a blank image or a 1x1px image? Chris — Progress indeed! Zero padding will work too. Chris — The breadcrumbs are positioned absolutely with CSS px from the top of the page. I think it would be better to hook them into the top of the content box, rather than after it. Anyway, thanks.

Kristarella, I hesitate to ask for your help because you give so much of your time already. When I set up my blog several years ago, I did so using the Copyblogger theme, and used your post, on personalising the theme, to get my header set up. It uses a fancy background, and the text stays centred no matter how wide the browser goes, and uses a repeater to full in the full width. But I want to use the same background which has a stripe of dark blue and one of lime green.

Do you know if there is a way to make a header image in photoshop and insert it into the thesis header area so it will fill it, with no white borders? Or, if I go the full width route, is there a way to use a repeater to fill up all the white space? The repeater I use at present is just the dark blue with lime green pattern.

I actually want to have a dark background container, as a border around the site, and then a header logo that fills all the header area. Can you point me in the right direction. Any help or advice you can give is much appreciated. Simon — To get a header in the full-width framework that is still surrounded with the site background, but without white space on the edges, add the repeating background to. See my full-width framework video for more info.

Thanks, great video, very useful. It seems to play overly fast but that might be a browser or flash glitch. Maybe you just speak very, very quickly! Where should I start to look? Darn it — I had it all sorted and done — using a transparency created in photoshop to put my logo over the repeater. It worked in all my browsers on my mac. I get a nasty blank patch where there should be lovely colour.

Simon — Which version of IE? Your two best options in my opinion are using javascript to render the image in IE6 or using a GIF with transparent background. If you follow that GIF tutorial you would place your logo over the repeated background and then use the fuzzy select. Have you tried using the highlighting feature of Firebug to see if any elements are larger than they should be? Is your header background tall enough? In the perfect world it would be wayyyyy easier than this to work with the header.

I tried messing with the code once and wrecked the site. Appreciate the tutorial just wish life was easier. Rod — It depends what you are trying to do. If you want to do more it takes more effort. If you want something really easy then WordPress.

Over its evolution it has become easier to use and more user friendly, but still has a real sense of DIY. In the past the problem with WYSIWYG editors and things that makes it easier to change the look of sites has been that they output dirty, unsemantic code: not good for cross-browser compatibility or SEO. The only solution was to code it yourself. I would be so happy if you could add code to this for moving the search box to the nav menu and place it either straight to the next to the nav men or to the far right.

Thank you so much. I know, but really appreciate you taking time to help out within the scope. No luck untill you struck. Thanks again! Kristarella: is it possible to make this kind of full width header clickable? Is there an alternative for making the header clickable? Or have I simply messed something up?

Simon — you also need. If I take out the text indent, then the hidden text logo becomes visible again, and then it is clickable though obviously the whole thing looks a mess. When I send it back off to the left with the then the header is no longer clickable. Thanks for the quick response. I have used wideget sidebar Text option to function as click able images.

However I am struck Sidebar1 background and Content background. Is there a way to make them Sidebar as well as Content transparent. Hey Krista, I have used the following code to make my header area transparent. But then can I still make it clickable to site url.

I added the code from for adding a search area in the right hand corner of the navigation bar. The problem is that the box is too small I need at least 30 digits worth of space , too thin and is misaligned with the rest of the nav bar. My questions are: 1. More importantly, how do I replace that with a google custom search box similar to the one you have on your home page I currently have it as a widget in my sidebar but it takes too much space there 3. Can you please refer me to other posts or resources on that topic?!

Thank you very, very much in advance for your help!!! Nikola — To fix the alignment etc you need to use CSS to change the padding of the menu item and the search box, and its width I guess. You might like to try using Firebug to investigate CSS problems like that. To have a google search box you need to create a Google Custom Search Engine and get the form code from them. Hi Kristarella, Thank you very much for your prompt help answer. The code that you have supplied works great and by playing around a bit I managed to position it on the right of the NavBar.

Any ideas?! Thanks a million again! It works. The only problem is that now I have the search button to the right of the Google Custom Search box and I do need that button there anymore… How do I get rid of it?! I was able to do the deader part in the custom. Instead I get:. Any way you can tell what I did wrong? In PHP a full stop can have special meanings depending on where it is. Was hoping you might be able to offer some advice. I added the code you suggest for the full nav and header.

Any thoughts? Appreciate it!! Your information has been very helpful. I have a question. I downloaded the OpenHooks plug in. I would like to add an image underneath the header. When I put the code in the plug in, it shows the code on the home page. Do you have any suggestions? I have been looking forever to try and find someone who has done the look you did, because I wanted something similar on my site.

Now I have, but it seems a little to complicated to decode using firebug, put it all together and then apply it to my site. I am just not at that coding level yet. Brandon — Do you mean the nav I have now with icons or the previous nav I had with non-dropdown hierarchy? I keep getting the background color of the page in my navigation bar. I would like to get rid of white bar and let the tan full frame header show through.

Here is a link to my site. I figured out my problem. You have a great site! Can you tell me how you made your header have a cool gradient with the knockout text. Shawn — The gradient is a transparent background image on header and the text is using the CSS3 text-shadow property. I added the code in Step 2 with a change to the color , and the background is now full width but the rest is not. Any suggestions? You can select whether to show both, either or neither of these in the Thesis Site Options.

To change the entire contents of the header you need a custom function such as:. Can you explain to me how I would go about switching the header and nav content. I would like the nav content to come first before the header. Would you be able to explain that to me? My logo is getting cut-off and stretches only as far as the sides of the menus.

Almost everything you need is in the post. In making my header full-width, I see from the code you gave it fills in on either side of my banner with the chosen color. Is there a way to do this using a gradient or pattern instead? Jan — To add a pattern or gradient you can add a CSS background image as well as colour.

For a gradient the image you should use the repeat-x property to get it to repeat horizontally, for a seamless pattern you can just use repeat and it will fill the area. I got onto this today by fooling around. I keep a test installation of WP and Thesis for my experiments.

I made the header as a gif, and then added a link to a small square of the same pattern instead of plain color to fill in the full-width. Is there any way to make a single image go full-width? It seems I have to fill the space with either a flat-color, a pattern or a gradient. If you give me examples I could have a look and see how those sites do it.

It was a yellowish background with a tree on the right side and the yellow background extended a ways down the left side of the content area. It looked very complicated to accomplish. I think with my paltry skill-set I can still be creative enough custom-designing a header with text and images on top of a background pattern. The possibilities seem endless. A simpler place to start might be how to put, for instance, RSS and RSS Email buttons on top of the header and, of course, still be clickable?

I ended up doing a vignette that only looked good in white to get rid of the squared off edges of the banner, so I had to create the full width effect using the navbar. Another late-at-night in this part of the world. That tends to depend on the type of photo as well.

Hi — Thanks for putting this up, your instructions are very clear. Unfortunately I tried doing this on a WordPress 3. I cut and pasted the code you have above and made sure they were in the right files after it crashed the first time, but I got the white screen of death both times. Where did I go wrong? If you mean on another site, then I have no idea where it could have gone wrong. My video on the fullwidth framework might shed more light on it for you.

Hi Kristerella — try to implement your code for the full width nav bar as above with Thesis 1. It doesnt work. I have checkd the code for spelling mistakes and the right position in the right files. I am not really familiar with using Thesis — but this looks like getting into coding very deeply; actually my goal is publishing content — if I can get the layout done… Would you suggest to go back to an earlier version of Thesis?

Any hints are more than welcome! Hope you find the time to give a hint. This code does work. Hello Kristarella, thank you very much for the unbelievable fast reply. Long story short: Your code works! That caused the error message. Really own you a favour. Thank you very much for being so supportive! You have a new regular follower of your Blog — have a nice day!.

Mario — Glad you found it! You have a nice day too! Hi Kristarella — You have some wonderful tutorials here, but I am stuck on this one. I somehow have two navbars. Do you know how I can go to only one? Hi Kristarella — I moved on to my footer and was called away when my daughter began drawing on my couch — lol. I have it back up. Thanks Kristarella — I figured it out. I want it to fit to the content rather than stretching across the screen, and I want it to be beside the title. Nothing I do seems to be working and the nav bar is stretching off the screen.

Thank you very much! My dilemma is how to determine the exact width to make a header graphic, so it neatly fits the width of the blog. What I need to know is:. Is there a rule of thumb for an amount to add to the sum of the column widths, in order to determine the resulting blog width? I believe the padding is affected by the font size for the site the first font-size thing on the design options page, which is 14px by default.

At the default 14px font size each sidebar has 1. The posts have 1. Never Mind! Sorry for the two comments! You can delete them if you want, I figured it out. Thank you very much Kristarella, for the great info on working out page widths. Your knowledge of this topic is quite astounding!!! Is it possible to have different Media Box contents on different pages, or even no Media Box on selected pages?

It would be really excellent to be able to have various different Media Box content on various different pages. Gail — It is possible to have different content in the multimedia box on different pages by adding the image URL, or video code, or whatever is needed in the Multimedia Box field on the post or page editing page. To do so, try adding the video to the MMbox, copy the code that is generated for the whole box when you view the page either right click and inspect element, or view source, to get the HTML then put it in a function like.

Hi there! Great blog — I have a really silly question. I have instructions about how to do a custom photo header. Open a new blank document in the size of your header area use 72dpi for web resolution I have thesis 1. How do I determine the size of my header area?

Linda — Have a look at comment Thanks Kristarella for making that video on using the full width framework. It was needed. But got a question how are you using to firebug to make those changes permanent? Are you using a text editor or are you going into the files inside your server and making the changes.

I am trying to learn web development and this has helped. I have it part of my current logo green stripe , but would like it better if it was part of the background and across the whole width. I hope that makes sense. Gene — I think I mentioned in the video that the changes in Firebug are temporary so you need to duplicate them in your CSS file. That can either be done by changing a local copy of the file and uploading it via FTP, or by using the built in file editor in Thesis.

Theres no other big trick to transferring the changes from Firebug to the file, I generally just type them out in the CSS file. I have a few questions. Donna — Your background colours are not applied to any of the full-width elements on the page.

Following the steps in this tutorial should produce what you need. Rosie — For starters, upgrade WordPress! Staying on old versions of WP is a security risk. As for the no sidebars, you can do that by selecting the No Sidebars page template on the right hand side of the page editing screen.

If there are no page templates in the dropdown box activate the default WP theme and then reactivate Thesis, they will show up then. Thanks VERY much your assistance. Fantastic job you are doing here. Might be time for a Kristarella Forum??? Hi Thank you for all the great work you have been doing here.. I want to extend the green bar in the nav menu to the full extent on the browser.

Tried with all the code available on full width frame work. Can you please help me out …. Navin — This tutorial should let you do exactly that. But my instructions on doing it from scratch are already in the blog post above. Hi Kristarella, can you teach me how to put my header image just on the right site.

So half of the header will be for the image on the right side. Thanks Filipe. Filipe — Most of your CSS is correct for making the background image right-aligned, just remove the margin-rightpx;. Great support post you have going here!

Darren — Do you mean change the text inside the box? In any event, thanks for all the great tutorials. Used your great advice to ad search function to nav, but now I am using the wordpress 3. Is there a way to add the search function to the WP 3.

I followed the tutorial above and was able to get the header and nav br done. My question is I am using Theisis 1. They either need to blend out to a plain colour at the ends or fit in with a repeatable image like the example in comment If you need it to be then you need to use CSS.

You can use the header upload tool and set your framework to full-width and set the background for. Rosie you need to wrap your code in a Conditional Tag. However, it is still appearing above both the Content column and the two Sidebars. Ideally I want it to appear just at the top of the Content column, above the headline of the most recent post. I am having some real trouble with the full width frame work. I want to basically have a background image behind my site logo, which is currently working and then wrap around the outside of the header, and down by the sidebar.

I wanted to make the background of these blank side areas a transparent element which means the header image can be seen to the right. My overall goal is to also include a css3 style radius curve to make it look fantastic! Oliver — Are you still having trouble with it? Yeah I finally got it working, I ended up putting a gradient on the image though.

I just had to play around in the CSS for a few hours! I do have one question. I have the menubar integration and when I add the hook for the full width nav area, the menubar integration is broken. Before changing it to full width nav, the menubar had to be named thesis-nav. Any idea what should be used after moving to full width? My main recommendation would be to upgrade to WordPress 3, Thesis 1. First of thank you for giving me some hope! Kumanga — See my post Page specific headers in Thesis.

Thanks, Kristarella. I am up-to-date on the latest Thesis and WordPress versions and the new version almost does everything. I have ditched the menubar for now. By playing with z-indexes I can get the header to overlay the content column and slideshow , but then the content column is also under the lighter green background, so only a thin strip of it shows at the top.

In short, I want the zig-zag pattern to continue across the content column. That make sense? I finally donated to your site, btw. Whether or not you have an answer to this, I appreciate all your great advice. Dave — Try this. Great article! Is this information still workable with thesis 1. Susan — Yes, this works with versions 1. It would vary somewhat with every single theme out there.

Have to say all your articles are very helpful… just getting started in CSS etc. And your tutorials are a fantastic help for getting a grip on thesis, its hooks, and CSS. Now, I did many things according to what you said. And most of them work. But now I have a problem. I want to have a Full width header to be a pixel-wide clickable jpg.

If you look at my site, you will see why I want it to be like that the slanted line. Anyway, I did it all, except that:. I cannot make the jpg centered I cant get rid of that dumb white line of space between the jpg and the navbar. I am using thesis 1. Is the original code still applicable in 1. Can you please let me know the exact code i should use if im using Thesis open hook? Sorry still a bit new to it all. However, that doesnt seem to work!

I did get rid of the white line, and the navbar is now just stuck to the top, which is nice, but I still want my header back! Bojan — You need to have the design option to display the title in the header enabled for the CSS I posted to work. Thanks for your help. Now I am getting a double header though and they both still do not go to the edge of my page.

And try checking the box under the After Header box to remove the nav bar from that hook. Wow that worked! Thanks for the great article. The header width code worked great. I am using Thesis 1. If it helps, I do have the following code already added under functions that places the nav below the header:. Sorry for the multiple posts.

I have a conundrum. Ant help would be great! Laura — Not sure what you mean. Do you mean the image in the feature box? Yes, sorry the feature box. I can get it to go to px so it is the same size as the page, but it juts right leaving a gap on the left. On another picture note, if you are using lots of pictures in your presentation, you might need to compress your images to reduce your PowerPoint file size. To learn how to compress images in PowerPoint, read our guide here.

Note: If you use SmartArt to crop your images, or fill a shape with a picture to make it transparent, the Design Ideas command will also not work. That is because PowerPoint considers your image as a shape, rather than a picture. To learn how to make an image transparent in PowerPoint, read our guide here.

PowerPoint Designer only generates design ideas for the 6 default slide layouts that come with PowerPoint. These 6 slide layouts include:. To expand your knowledge and learn how to set up and design new slide layouts for your templates without Designer, read our guide here. See Fix 3 and Fix 4. Note: If you add an extra placeholder to one of the default 6 PowerPoint layouts on the Slide Master, that is the same as creating your own custom slide layout.

The PowerPoint Design Ideas command does not work with custom slide layouts. If you think you are using the right type of content, you can always copy and paste it into a blank presentation to see if that fixes the issue. With this feature active, any time that Designer can give you layouts ideas based on the content on your slide, it will pop open. In addition, checking the Automatically show me design ideas gives you a second option to show you suggestions for the entire presentation.

With this option selected, when you start a brand new presentation, Design Ideas will give you what appears to be the usual layout ideas for your one slide. However, when you choose one of those layouts, Designer will then apply an entire theme to your presentation. Furthermore, that same style will be applied to all your slide layout options. The theme includes slide layouts in the Slide Master, a font combination, and color palette.

To learn more about PowerPoint themes, read our guide here. At any time you can open the Designer Pane for a specific slide. To do that, simply:. Whether or not your see layout ideas for your slide will again depend on your content, your layout, and other factors as discussed in this article. While you can save your presentations this way, the Design Ideas tab will not work in those types of presentations.

It will simply appear grayed out. If you were previously using a Macro-Enabled or to presentation, you should now find that the Design Ideas works again. The Office Intelligence Services is something that an IT administrator can turn off within your company. Therefore, if nothing else in this post works and you believe you have an Office subscription, double-check with the IT department in your company.

Assuming you have a Microsoft Office subscription and your company has not turned this feature off, the main thing to remember is to check your content and your layouts. If Designer is not working, it can almost always be traced back to one of these two things. If you enjoyed this article, you can learn more about our PowerPoint training courses and other presentation resources by visiting us here.

You'll also get our newsletter with the best PPT tips on the web, which you can unsubscribe from with one click. We collect and protect your information in accordance to our Privacy Policy. What is Design Ideas in PowerPoint? Microsoft Office subscription only. Design Ideas requires internet access. So that is somethign else to check if Designer is not working for you. Remove mixed shapes on your slide.

REFLECTIONS ON EXILE AND OTHER LITERARY AND CULTURAL ESSAYS

Message, weber max essay in sociology bureaucracy 1946 are not

Thank you very, very much in advance for your help!!! Nikola — To fix the alignment etc you need to use CSS to change the padding of the menu item and the search box, and its width I guess. You might like to try using Firebug to investigate CSS problems like that.

To have a google search box you need to create a Google Custom Search Engine and get the form code from them. Hi Kristarella, Thank you very much for your prompt help answer. The code that you have supplied works great and by playing around a bit I managed to position it on the right of the NavBar.

Any ideas?! Thanks a million again! It works. The only problem is that now I have the search button to the right of the Google Custom Search box and I do need that button there anymore… How do I get rid of it?! I was able to do the deader part in the custom. Instead I get:. Any way you can tell what I did wrong? In PHP a full stop can have special meanings depending on where it is. Was hoping you might be able to offer some advice. I added the code you suggest for the full nav and header.

Any thoughts? Appreciate it!! Your information has been very helpful. I have a question. I downloaded the OpenHooks plug in. I would like to add an image underneath the header. When I put the code in the plug in, it shows the code on the home page. Do you have any suggestions? I have been looking forever to try and find someone who has done the look you did, because I wanted something similar on my site. Now I have, but it seems a little to complicated to decode using firebug, put it all together and then apply it to my site.

I am just not at that coding level yet. Brandon — Do you mean the nav I have now with icons or the previous nav I had with non-dropdown hierarchy? I keep getting the background color of the page in my navigation bar. I would like to get rid of white bar and let the tan full frame header show through. Here is a link to my site.

I figured out my problem. You have a great site! Can you tell me how you made your header have a cool gradient with the knockout text. Shawn — The gradient is a transparent background image on header and the text is using the CSS3 text-shadow property. I added the code in Step 2 with a change to the color , and the background is now full width but the rest is not. Any suggestions? You can select whether to show both, either or neither of these in the Thesis Site Options.

To change the entire contents of the header you need a custom function such as:. Can you explain to me how I would go about switching the header and nav content. I would like the nav content to come first before the header. Would you be able to explain that to me? My logo is getting cut-off and stretches only as far as the sides of the menus.

Almost everything you need is in the post. In making my header full-width, I see from the code you gave it fills in on either side of my banner with the chosen color. Is there a way to do this using a gradient or pattern instead? Jan — To add a pattern or gradient you can add a CSS background image as well as colour. For a gradient the image you should use the repeat-x property to get it to repeat horizontally, for a seamless pattern you can just use repeat and it will fill the area.

I got onto this today by fooling around. I keep a test installation of WP and Thesis for my experiments. I made the header as a gif, and then added a link to a small square of the same pattern instead of plain color to fill in the full-width. Is there any way to make a single image go full-width?

It seems I have to fill the space with either a flat-color, a pattern or a gradient. If you give me examples I could have a look and see how those sites do it. It was a yellowish background with a tree on the right side and the yellow background extended a ways down the left side of the content area. It looked very complicated to accomplish. I think with my paltry skill-set I can still be creative enough custom-designing a header with text and images on top of a background pattern.

The possibilities seem endless. A simpler place to start might be how to put, for instance, RSS and RSS Email buttons on top of the header and, of course, still be clickable? I ended up doing a vignette that only looked good in white to get rid of the squared off edges of the banner, so I had to create the full width effect using the navbar. Another late-at-night in this part of the world.

That tends to depend on the type of photo as well. Hi — Thanks for putting this up, your instructions are very clear. Unfortunately I tried doing this on a WordPress 3. I cut and pasted the code you have above and made sure they were in the right files after it crashed the first time, but I got the white screen of death both times.

Where did I go wrong? If you mean on another site, then I have no idea where it could have gone wrong. My video on the fullwidth framework might shed more light on it for you. Hi Kristerella — try to implement your code for the full width nav bar as above with Thesis 1. It doesnt work. I have checkd the code for spelling mistakes and the right position in the right files.

I am not really familiar with using Thesis — but this looks like getting into coding very deeply; actually my goal is publishing content — if I can get the layout done… Would you suggest to go back to an earlier version of Thesis? Any hints are more than welcome! Hope you find the time to give a hint. This code does work. Hello Kristarella, thank you very much for the unbelievable fast reply. Long story short: Your code works! That caused the error message. Really own you a favour.

Thank you very much for being so supportive! You have a new regular follower of your Blog — have a nice day!. Mario — Glad you found it! You have a nice day too! Hi Kristarella — You have some wonderful tutorials here, but I am stuck on this one. I somehow have two navbars. Do you know how I can go to only one?

Hi Kristarella — I moved on to my footer and was called away when my daughter began drawing on my couch — lol. I have it back up. Thanks Kristarella — I figured it out. I want it to fit to the content rather than stretching across the screen, and I want it to be beside the title. Nothing I do seems to be working and the nav bar is stretching off the screen. Thank you very much! My dilemma is how to determine the exact width to make a header graphic, so it neatly fits the width of the blog.

What I need to know is:. Is there a rule of thumb for an amount to add to the sum of the column widths, in order to determine the resulting blog width? I believe the padding is affected by the font size for the site the first font-size thing on the design options page, which is 14px by default.

At the default 14px font size each sidebar has 1. The posts have 1. Never Mind! Sorry for the two comments! You can delete them if you want, I figured it out. Thank you very much Kristarella, for the great info on working out page widths.

Your knowledge of this topic is quite astounding!!! Is it possible to have different Media Box contents on different pages, or even no Media Box on selected pages? It would be really excellent to be able to have various different Media Box content on various different pages. Gail — It is possible to have different content in the multimedia box on different pages by adding the image URL, or video code, or whatever is needed in the Multimedia Box field on the post or page editing page.

To do so, try adding the video to the MMbox, copy the code that is generated for the whole box when you view the page either right click and inspect element, or view source, to get the HTML then put it in a function like.

Hi there! Great blog — I have a really silly question. I have instructions about how to do a custom photo header. Open a new blank document in the size of your header area use 72dpi for web resolution I have thesis 1. How do I determine the size of my header area?

Linda — Have a look at comment Thanks Kristarella for making that video on using the full width framework. It was needed. But got a question how are you using to firebug to make those changes permanent? Are you using a text editor or are you going into the files inside your server and making the changes.

I am trying to learn web development and this has helped. I have it part of my current logo green stripe , but would like it better if it was part of the background and across the whole width. I hope that makes sense. Gene — I think I mentioned in the video that the changes in Firebug are temporary so you need to duplicate them in your CSS file. That can either be done by changing a local copy of the file and uploading it via FTP, or by using the built in file editor in Thesis.

Theres no other big trick to transferring the changes from Firebug to the file, I generally just type them out in the CSS file. I have a few questions. Donna — Your background colours are not applied to any of the full-width elements on the page. Following the steps in this tutorial should produce what you need. Rosie — For starters, upgrade WordPress! Staying on old versions of WP is a security risk.

As for the no sidebars, you can do that by selecting the No Sidebars page template on the right hand side of the page editing screen. If there are no page templates in the dropdown box activate the default WP theme and then reactivate Thesis, they will show up then. Thanks VERY much your assistance. Fantastic job you are doing here. Might be time for a Kristarella Forum??? Hi Thank you for all the great work you have been doing here.. I want to extend the green bar in the nav menu to the full extent on the browser.

Tried with all the code available on full width frame work. Can you please help me out …. Navin — This tutorial should let you do exactly that. But my instructions on doing it from scratch are already in the blog post above. Hi Kristarella, can you teach me how to put my header image just on the right site. So half of the header will be for the image on the right side. Thanks Filipe. Filipe — Most of your CSS is correct for making the background image right-aligned, just remove the margin-rightpx;.

Great support post you have going here! Darren — Do you mean change the text inside the box? In any event, thanks for all the great tutorials. Used your great advice to ad search function to nav, but now I am using the wordpress 3. Is there a way to add the search function to the WP 3. I followed the tutorial above and was able to get the header and nav br done.

My question is I am using Theisis 1. They either need to blend out to a plain colour at the ends or fit in with a repeatable image like the example in comment If you need it to be then you need to use CSS. You can use the header upload tool and set your framework to full-width and set the background for. Rosie you need to wrap your code in a Conditional Tag. However, it is still appearing above both the Content column and the two Sidebars.

Ideally I want it to appear just at the top of the Content column, above the headline of the most recent post. I am having some real trouble with the full width frame work. I want to basically have a background image behind my site logo, which is currently working and then wrap around the outside of the header, and down by the sidebar. I wanted to make the background of these blank side areas a transparent element which means the header image can be seen to the right.

My overall goal is to also include a css3 style radius curve to make it look fantastic! Oliver — Are you still having trouble with it? Yeah I finally got it working, I ended up putting a gradient on the image though.

I just had to play around in the CSS for a few hours! I do have one question. I have the menubar integration and when I add the hook for the full width nav area, the menubar integration is broken. Before changing it to full width nav, the menubar had to be named thesis-nav. Any idea what should be used after moving to full width? My main recommendation would be to upgrade to WordPress 3, Thesis 1. First of thank you for giving me some hope!

Kumanga — See my post Page specific headers in Thesis. Thanks, Kristarella. I am up-to-date on the latest Thesis and WordPress versions and the new version almost does everything. I have ditched the menubar for now.

By playing with z-indexes I can get the header to overlay the content column and slideshow , but then the content column is also under the lighter green background, so only a thin strip of it shows at the top. In short, I want the zig-zag pattern to continue across the content column. That make sense? I finally donated to your site, btw. Whether or not you have an answer to this, I appreciate all your great advice. Dave — Try this. Great article!

Is this information still workable with thesis 1. Susan — Yes, this works with versions 1. It would vary somewhat with every single theme out there. Have to say all your articles are very helpful… just getting started in CSS etc. And your tutorials are a fantastic help for getting a grip on thesis, its hooks, and CSS. Now, I did many things according to what you said. And most of them work.

But now I have a problem. I want to have a Full width header to be a pixel-wide clickable jpg. If you look at my site, you will see why I want it to be like that the slanted line. Anyway, I did it all, except that:. I cannot make the jpg centered I cant get rid of that dumb white line of space between the jpg and the navbar. I am using thesis 1. Is the original code still applicable in 1. Can you please let me know the exact code i should use if im using Thesis open hook? Sorry still a bit new to it all.

However, that doesnt seem to work! I did get rid of the white line, and the navbar is now just stuck to the top, which is nice, but I still want my header back! Bojan — You need to have the design option to display the title in the header enabled for the CSS I posted to work. Thanks for your help. Now I am getting a double header though and they both still do not go to the edge of my page. And try checking the box under the After Header box to remove the nav bar from that hook. Wow that worked!

Thanks for the great article. The header width code worked great. I am using Thesis 1. If it helps, I do have the following code already added under functions that places the nav below the header:. Sorry for the multiple posts. I have a conundrum. Ant help would be great!

Laura — Not sure what you mean. Do you mean the image in the feature box? Yes, sorry the feature box. I can get it to go to px so it is the same size as the page, but it juts right leaving a gap on the left. I made it smaller to give an equal gap on the right, but I would rather it went across without gaps.

Please any help would be greatly appreciated. I love your tutorials, but am having a problem. I switched my layout from page to full-width. Now though, neither my logo nor my navigation bars show up. Any other thoughts on how to potentially resolve this issue? First, I want to say thank you for such and resourceful and informational tutorial blog! You rock! My question is: Do I have to change all my coding as a Pageframework layout to go to Full Width layout? I followed your instructions back in Thesis 1.

Your instructions are just what I needed to make a full width header. I just followed directions and uploaded. Linda — Just to clarify, in case there was some confusion, this tutorial has nothing to do with the header upload feature in Thesis and the header upload feature does not provide full-width headers.

Thanks for such a quick reply! How can I tell if I made the changes correctly in the editors other than that I see blue and the header is full width? Or, is their another way to use a background image other than the upload feature? The syntax highlighting helps visualise code a bit easier. I talked about them a bit in this article on the DIYthemes Thesis blog. Regarding the header colour.

Or you can use a transparent background PNG header image to not worry about the colour behind it, or you can apply header images in multiple ways using CSS. Thank you so much for your tutorials! I have learned so much about Thesis and WordPress thanks to folks like you who have taken the time to put great tutorials together! Thanks for all the great tutorials. I am a blogger and by no means a designer.

I need to make my header height smaller to match my logo. Thanks Craig. For the colours, you probably need two images with matching gradients, as demonstrated in comment Is there a way to get that back? Tim — Not just with the Design Options. You can try something like:.

Where ddd is a colour slightly darker than the background colour it will mostly get the effect back. Tim — I guess it depends where you want the shadow and whether your header and footer are true full-width as to what you need.

If you narrow the page down until you get a horizontal scroll bar, the full width segments of the header break on the right side. Figure out what your. In Thesis 1. I assume Pearson calculated this one by including ALL the widths, paddings and margins across the entire site. So, all the math is done for you already. The header is just not there in IE. It must be something simple. Could you firebug it and help? Bojan — Remove the width CSS from.

I have a simple banner that I would like to upload and run right across the page just like your banner does I did read your tutorial on that and realize what I am asking is somewhat different with no white space. But I want to keep my two column set up the same and px in size respectively again much like you have done.

Is there anyway for me to do this. Thesis has resized it to px. How do I get it to run right across with no white space? Dean — You need the following in custom. Then you may also need the to follow the above for a full-width nav , otherwise it may look a bit odd. Lisa — The CSS to make it look pretty goes in custom.

I have my header to be full width, and it looks great AT MY resolution x In short, I was wondering if you had any code to make the header fluid so that it automatically adjusts depending on the browsers resolution. Thanks so much! And, in what way does it not look good at smaller resolutions?

It looks good at x , but when you down to say, x , the header is far too wide, which results in a bit more than half of the header displaying without scrolling to the right. I suppose I am looking for code that will automatically resize the header image depending on the browsers resolution.

Ryan — Try this instead:. I am trying the php now. However, I was wondering what code should be where the broken image is above, if any. Last question. Am I placing my url anywhere in that code other than to locate the image? Thank you again! I want to thank you for your help. None of the above worked, so I redesigned my header to be repeating so that a smaller browser resolution should not appear to be cutting anything off.

Thanks again for your help. Hi kristarella can you help me or give me some guide how to change my header color? Not sure what other info I can give you. Lisa — The answer to your question depends on the kind of image. Try comment 77 and see if that helps you. It needs to repeat and cover the entire header area. So, this is all new to me as of today actually. What file in WordPress do I need to access to make the background repeatable?

Would you explain where to put the code and exactly how it should be coded? So, it goes in custom. Then you use the same background image CSS syntax to add the non-repeating image to header. My custom. Which do I edit? I tried finding the custom. I am getting more and more confused as the day goes on here. What do I do next as far as editing the custom.

The header is what I added yesterday and want it to extend the entire top of the website. By the way, I have Theses 1. Krystyn — Did you figure it out? It all looks blue to me. Yes, I did. Just had to figure out how to add a background to the table and line it all up. I created a full width nav menu and moved it below the header using your code, but if I try to move it above the header using your code:.

Hey Kristarella! Do you mind helping me with something? I did this full width navigation bar and it worked but now I have a duplicate nav bar in the middle of my header!! Any idea how to get rid of it? Hello I have tweeked my code a little bit and got my page to full width or a width that I want. I am having trouble adding a banner that can be found at. Do you have any suggestions on what I need to do to get this banner working in the header area of my page.

Is my banner too big? I need Help no matter what I do I can not insert my logo image in my thesis 1. Here is my php and css files let me know what I am doing wrong please. One more thing how can I fix my tabs in the nav menu I added above header? AsiaPundits — Have you figured out the header? Ok thanks I will try that. I have the logo up but in the body it would not work with the Header image uploader.

Thanks for the tip. Your tips and advice here has been invaluable Thanks! Thank you for this fantastic tutorial. However, once I took the plunge and followed your instructions, I am delighted with the results on my blog. Hello Kristarella and thank You for this post and all comments! But can you explain me how to put full-width nav menu above every thing? Something like: — full-width menu — header — content — full-width footer! Excuse me for second post, but must give some explanations!

This site is designed as I want! You are wonderful. Just fixed a problem I have been struggling with for weeks width your excellent full width nav tut. I join many others who have commented on your incredible detail and dedication in providing these thesis tutorials. I have another post about footers. But who to see it!

Good luck! Is it possible to have rotating images using this approach? If you have a different colour altogether and want it to load randomly every time the page loads you can do that by adding a random class to the body of the page and then using CSS with that class… I did that on SpaceCrazed to rotate through different images in the background.

Kris — Thanks very much for the response. Jon — You can get the whole list of hooks in the user manual. Alright so maybe I am over complicating things but I want to make the navigation bar and header to be the width of the browser. But I was hoping to essentially make it mimic your site. I am trying to follow this tutorial to create a full width header and navbar. The header part works, but I cannot get the navbar to go full width. If I can get some guidance, it would be appreciated.

I am very new to web design and thesis. I have used some CSS code that I found to customize my navigation bar font but now my navigation bar does not stretch the full length of my header image. Could you please tell me how to ensure that my navigation bar is always the same width as my header image in both IE8 and IE9? Thanks, Lori. Lori — You need the CSS. Not sure about the width… is it the same width as the header in any browser?

Do you mean the edge of the logo and the edge of the text? Hi Kristarella, Wow, thank you so much!! The navigation bar appears to be fixed, now in order to get everything to line up properly I will need to fix the header because the orange bar that stretches across the bottom is a few pixels short.

I wish that I had posted a comment to your site earlier, it could have saved me a few hours. Thank you for your kindness, you are an inspiration. I have a full width image as my header and it does not render properly when viewed from other computers. Les — I think the best way to do that is to use two images. One that repeats, and then the main header. Check out this comment with an image that demonstrates that. Hi Kristarella, I just moved all the content from my website to wordpress and all it is left is the design part to fix.

I just wonder if all those pieces of code need to be copied and pasted or they need to be adapted for each case? On my site I have the header composed of 3 images which slide every 2 sec or something like that. Is it possible to do the same on wordpress of course I have thesis.

How can I span the tabs of the menu across the entire width? HI kristi, thanks it works. I was just wondering if I could make the nav full width as well. Apparently one has to jump through hoops to make wpml wortk with thesis. One solution that seems to have worked is to use the navigo plugin to generate menus.

If so, where does it get placed? After this there will be the. I have followed your instructions, code works very well — thank you for great information. I am still tweaking nav area. So in other words, when staring this process I set the design options to full-width framework which made my site a fluid full-width layout throughout header content and footer.

Then following your code, my content area is back to my specified width and not fluid as browser window displays. Cindy — Thesis is never a fluid layout by default. The content is always centered and has a specific width. If you want a liquid layout you will have to use your own custom CSS; I believe there are other tutorials for that. Thanks for help. Instead I have used:.

Great tutorial, I have successfully designed my own header via your instruction, great. Ferb — Good job! Nice an simple. I like the position of the search box. I am using the current Thesis and have copied and pasted your posted instructions into my custom. I have played around with a couple different things….

Help please? Seriously wishing I could delete that last comment. Glad it worked out in the end. Kristarella, Dec 20th last year I commented with an issue about color bleeding beyond nav borders… not sure what I meant exactly — too near the holidays. So I was getting some odd results when using css code…. So basically I have correct that issue and now trying to get a border above the nav bar and also one below it. The border below should stop at the page border not at the main-menu-container… any help there?

Is this a quick fix? This should do it for me, I hope for a while. I have enjoyed and appreciated tutorials like yours. It is almost like a border, but it is just on that one edge and about 1px of that same light gray on the bottom edge of the current page tab. Cindy — You can use. Luke — If you set the border width to 0 in the Thesis Design Options in the section for the nav colours second column that will remove all borders for the nav. Could you point me in the right direction to figure this out?

So tonight I was finally able to get a decent search form on my page, above my header, and floating to the right. I can get it above or below it…but not in it. Or you can put the search bar after the menu inside the page div of your full width nav area, and then use this CSS to position. So now I have a search field about 1.

The rest of the field is unresponsive to my mouse. Luke — Probably a z-index issue: the menu div might be overlapping the search form. Add z-index; to the second line of CSS. After reading through your great tutorials, I think I am almost? Andrea — Yep, comment 77 is pretty much exactly what you need to do. I wish to get your assistance on how to creating a full width navigation bar on my homepage. I tried on dreamweaver to make a bar to full the screen but everytime there is always a gap on both ends.

Would you please give me some hints on how to realize that. I could possibly troubleshoot it if I saw your site with the gaps on the nav in action, but not really out of thin air. I have a question, what is the correct total width for the page? Should it be px or px or something else? I think more than px is not preferable, but there is also a lot of talk about adaptive web design at the moment where you can accomodate several browser sizes and change the layout accordingly….

The widths you need depend on your content. Hi Kristarella, At the time I set up my blog, I had a website company design my header and footer for me, according to a size that they decided on. I am assuming that its size cannot be changed, but I am not sure.

Luke — To add a nav item to the WordPress nav you need to use a filter. Vanessa — To make a full-width header and footer on your site you would need to modify the image so that it blended out into a uniform colour e. At the moment your header and footer images have a pattern that stops with the edge of the image: it would look weird to try to extend that without tweaking the images.

You would maybe also want to use a second repeatable background image with plain blue at the bottom and white at the top, so that the blue flourish out the top is still visible. I seem to be getting a smaller gap where the bottom of the nav bar and the page connect. It seem to be happening in 1. Not seeing it in 1. I take that back….

Its happening in 1. It a small ripple in the corner where the bottom of the nav bar and the side of the page connect. It is happening on some sites but not others. Not sure what the difference is? Thanks so much for your response! Thanks so much for all of your help! Hi, when I tried to put in the 2nd part of step 2, my whole site became unviewable…. Is there a way I can extend the nav bar to the edges?

It will indicate where the problem is. The error messages appear only in the dashboard area. I followed your post to get the header done but the shadow goes away. Can you please suggest a way around. I added the shadow under content area and footer area like this.

I am trying to eliminate the white space to the left and right of my header image. How do I fill in that white space with a continuation of my header color so that it works with all sizes? The post also covers creating a separate nav if you want to maintain the border between header and nav. If I wanted to learn all of this would you recommend CSS: The missing manual or is there something else? Learning in context I think is generally more effective.

I got that code from another tutorial site and just copied and pasted it. I went through all the comments and am still a bit confused. My apologies. Everything else looks good and is viewable other than this. Enter your email address to subscribe to this blog and receive notifications of new posts by email. Email Address. Step 1 — Full-width framework In the Thesis Design Options you need to set your framework to full-width. Like this: Like Loading Comments Great post.

Thanks for the update! Much easier indeed. I love the full width framework too! Hi Kristarella, Nice tutorial. This is where my html and CSS knowledge stops: Do you have any suggestions on how to go forward to achieve this? Kristarella, Nice, I went to the beta a while back however, when I view the various themes in wordpress admin preview section it still says 1. Hey, Yeah, it does now.

Your CSS should be more like: body. Glad it worked Richard! Kristarella, Thank you for creating this tutorial. I have done the following: 1. Thank you, Matt. Hi Kristarella, I asked a dumb question before and you were kind enough to answer me, so here goes again! On IE my footer area gets cut off prematurely. Do I need to fix the height for that div? Elliot, bit of an unrelated question on a post about headers… Anyway, I think you need.

Great tutorial! As usual… One note for you that may help others with this though. Many Thanks… Followed your instructions, so far so good… Can you tell me how to change the headline colour please? How can I overwrite the layout. Actually, something weird. Consequently, if you add a shape, line, text box, ink or video to your slide, the Design Ideas command will likely not work.

Alternatively, you can try copying and pasting your content on a blank slide to see if Design Ideas works there. PowerPoint Designer only works for up to 10 pictures, 6 icons, 1 SmartArt graphic, 1 table or 1 chart on a PowerPoint slide. I call this the rule for PowerPoint Designer. Additionally, you cannot mix and match any of these shapes on a slide for Designer to work.

Notice in the picture below how the Design Ideas command works for 10 pictures on the slide, giving you a variety of layout ideas on the right. Depending on the size of your picture, sometimes you can only sneak 6 pictures on a slide too before Designer stops working.

On another picture note, if you are using lots of pictures in your presentation, you might need to compress your images to reduce your PowerPoint file size. To learn how to compress images in PowerPoint, read our guide here. Note: If you use SmartArt to crop your images, or fill a shape with a picture to make it transparent, the Design Ideas command will also not work.

That is because PowerPoint considers your image as a shape, rather than a picture. To learn how to make an image transparent in PowerPoint, read our guide here. PowerPoint Designer only generates design ideas for the 6 default slide layouts that come with PowerPoint. These 6 slide layouts include:.

To expand your knowledge and learn how to set up and design new slide layouts for your templates without Designer, read our guide here. See Fix 3 and Fix 4. Note: If you add an extra placeholder to one of the default 6 PowerPoint layouts on the Slide Master, that is the same as creating your own custom slide layout. The PowerPoint Design Ideas command does not work with custom slide layouts.

If you think you are using the right type of content, you can always copy and paste it into a blank presentation to see if that fixes the issue. With this feature active, any time that Designer can give you layouts ideas based on the content on your slide, it will pop open.

In addition, checking the Automatically show me design ideas gives you a second option to show you suggestions for the entire presentation. With this option selected, when you start a brand new presentation, Design Ideas will give you what appears to be the usual layout ideas for your one slide.

However, when you choose one of those layouts, Designer will then apply an entire theme to your presentation. Furthermore, that same style will be applied to all your slide layout options. The theme includes slide layouts in the Slide Master, a font combination, and color palette.

To learn more about PowerPoint themes, read our guide here. At any time you can open the Designer Pane for a specific slide. To do that, simply:. Whether or not your see layout ideas for your slide will again depend on your content, your layout, and other factors as discussed in this article. While you can save your presentations this way, the Design Ideas tab will not work in those types of presentations.

It will simply appear grayed out. If you were previously using a Macro-Enabled or to presentation, you should now find that the Design Ideas works again. The Office Intelligence Services is something that an IT administrator can turn off within your company. Therefore, if nothing else in this post works and you believe you have an Office subscription, double-check with the IT department in your company. Assuming you have a Microsoft Office subscription and your company has not turned this feature off, the main thing to remember is to check your content and your layouts.

If Designer is not working, it can almost always be traced back to one of these two things. If you enjoyed this article, you can learn more about our PowerPoint training courses and other presentation resources by visiting us here.

Design working not thesis options resume cover letter for sales associate

Msc Dissertation Help

However, when you choose one css files let me know not insert my logo image. How do I fill in the 90 day sales business plan a while back got my page to full duplicate nav bar in the. This should do it for. Hi, when I tried to content area and footer area bit confused. Hello I have tweeked my code a little bit and of the nav bar and. I am trying to eliminate the white space to the recommend CSS: The missing manual. I have a Content Column but must give some explanations. Hey, Yeah I finally got I could make the nav to the table and line. I love the full width framework too. Hi Kristarella, At the time you start a brand new I had a website company in the section for the nav colours second column that to extend that without tweaking.

Design Options involve things like fonts, colors, and layout settings—stuff that affects the Skin CSS. They present infinite customization possibilities and. And by extension, the solution to this problem is also one of the most important aspects of Thesis. The Thesis Options API: A Translator for WordPress. The best. The code might no longer work. Comments have been disabled as this is no Activate Thesis, and leave the default Thesis Options/Design Options settings.